Assessment of antibacterial properties and skin irritation potential of anodized aluminum impregnated with various quaternary ammonium.

The importance of the inert environment in the transmission of pathogens has been reassessed in recent years. To reduce cross-contamination, new biocidal materials used in high touch surfaces (e.g., stair railings, door handles) have been developed. However, their impact on skin remains poorly described. The present study aimed to evaluate the antibacterial properties and the risk of skin irritation of two materials based on hard-anodized aluminum (AA) impregnated with quaternary ammonium compound solutions (QAC#1 or QAC#2). The QAC#1 or QAC#2 solutions vary in composition, QAC#2 being free of dioctyl dimethyl ammonium chloride (Dio-DAC) and octyl decyl dimethyl ammonium chloride (ODDAC). Unlike AA used as a control, both AA-QAC#1 and AA-QAC#2 had excellent and rapid antibacterial efficacy, killing 99.9 % of Staphylococcus aureus and Escherichia coli bacteria, in 15 s and 1 min, respectively. The impregnation solutions (QAC#1 and QAC#2) did not show any skin sensitizing effect on transformed human keratinocytes. Nevertheless, these solutions as well as the materials (AA-QAC#1, AA-QAC#2), and the liquid extracts derived from them, induced a very rapid cytotoxicity on L929 murine fibroblasts (>70 % after 1 h of contact) as shown by LDH, MTS and neutral red assays. This cytotoxicity can be explained by the fast QACs release occurring when AA-QAC#1 and AA-QAC#2 were immersed in aqueous medium. To overcome the limitation of assays based on liquid condition, an in vitro skin irritation assay on reconstructed human epidermis (RHE) was developed. The effect of the materials upon their direct contact with the epidermis grown at the liquid-air interface was determined by evaluating tissue viability and quantifying interleukin-1 alpha (IL-1α) which is released in skin during injury or infection. AA-QAC#1 induced a significant decrease in RHE viability, close to OECD and ISO 10993-10 acceptability thresholds and enhanced the pro-inflammatory IL-1α secretion compared with AA-QAC#2. Finally, these results were corroborated by in vivo assays on mice using erythema and edema visual scores, histological observations, and epidermal thickness measurement. AA had no effect on the skin, while a stronger irritation was induced by AA-QAC#1 compared with AA-QAC#2. Hence, these materials were classified as moderate and slight irritants, respectively. In summary, this study revealed that AA-QAC#2 without Dio-DAC and ODDAC could be a great candidate for high touch surface applications, showing an extremely effective and rapid bactericidal activity, without inducing adverse effects for skin tissue.

Rapid antibacterial activity of anodized aluminum-based materials impregnated with quaternary ammonium compounds for high-touch surfaces to limit transmission of pathogenic bacteria.

Infections caused by multidrug-resistant bacteria are a major public health problem. Their transmission is strongly linked to cross contamination via inert surfaces, which can serve as reservoirs for pathogenic microorganisms. To address this problem, antibacterial materials applied to high-touch surfaces have been developed. However, reaching a rapid and lasting effectiveness under real life conditions of use remains challenging. In the present paper, hard-anodized aluminum (AA) materials impregnated with antibacterial agents (quaternary ammonium compounds (QACs) and/or nitrate silver (AgNO3)) were prepared and characterized. The thickness of the anodized layer was about 50 µm with pore diameter of 70 nm. AA with QACs and/or AgNO3 had a water contact angle varying between 45 and 70°. The antibacterial activity of the materials was determined under different experimental settings to better mimic their use, and included liquid, humid, and dry conditions. AA-QAC surfaces demonstrated excellent efficiency, killing >99.9% of bacteria in 5 min on a wide range of Gram-positive (Staphylococcus aureus, Clostridioides difficile, vancomycin-resistant Enterococcus faecium) and Gram-negative (streptomycin-resistant Salmonella typhimurium and encapsulated Klebsiella pneumoniae) pathogens. AA-QACs showed a faster antibacterial activity (from 0.25 to 5 min) compared with antibacterial copper used as a reference (from 15 min to more than 1 h). We show that to maintain their high performance, AA-QACs should be used in low humidity environments and should be cleaned with solutions composed of QACs. Altogether, AA-QAC materials constitute promising candidates to prevent the transmission of pathogenic bacteria on high-touch surfaces.

Peptides derived from the knuckle epitope of BMP-9 induce the cholinergic differentiation and inactivate GSk3beta in human SH-SY5Y neuroblastoma cells.

The incidence of brain degenerative disorders like Alzheimer's disease (AD) will increase as the world population ages. While there is presently no known cure for AD and current treatments having only a transient effect, an increasing number of publications indicate that growth factors (GF) may be used to treat AD. GFs like the bone morphogenetic proteins (BMPs), especially BMP-9, affect many aspects of AD. However, BMP-9 is a big protein that cannot readily cross the blood-brain barrier. We have therefore studied the effects of two small peptides derived from BMP-9 (pBMP-9 and SpBMP-9). We investigated their capacity to differentiate SH-SY5Y human neuroblastoma cells into neurons with or without retinoic acid (RA). Both peptides induced Smad 1/5 phosphorylation and their nuclear translocation. They increased the number and length of neurites and the expression of neuronal markers MAP-2, NeuN and NSE better than did BMP-9. They also promoted differentiation to the cholinergic phenotype more actively than BMP-9, SpBMP-9 being the most effective as shown by increases in intracellular acetylcholine, ChAT and VAchT. Finally, both peptides activated the PI3K/Akt pathway and inhibited GSK3beta, a current AD therapeutic target. BMP-9-derived peptides, especially SpBMP-9, with or without RA, are promising molecules that warrant further investigation.

Effects of BMP-9 and BMP-2 on the PI3K/Akt Pathway in MC3T3-E1 Preosteoblasts.

The bone morphogenetic proteins (BMPs), which are involved in bone formation and repair, play an important role in tissue engineering. For example, BMP-9 and BMP-2, which are members of different BMP subfamilies, are osteoinductive factors. However, several studies have recently shown that BMP-9 is more osteogenic than BMP-2. We have previously shown that fetal bovine serum (FBS) strongly enhances the osteoblast differentiation of murine preosteoblasts (MC3T3-E1) to BMP-9 but not to BMP-2. This effect is mimicked by IGF-2, which primarily activates the PI3K/Akt pathway, but how Akt phosphorylation sites are implicated in such differentiation is unclear. The effects of BMP-9 and BMP-2 with or without FBS or IGF-2 on Akt phosphorylation sites and subsequent osteoblastic differentiation were determined, respectively, by western blot analysis and alkaline phosphatase activity measurements. The involvement of phosphorylated Akt at Thr308 and/or Ser473 on BMP-mediated osteoblast differentiation was further studied using specific inhibitors. In MC3T3-E1 incubated with or without FBS, BMP-9 and BMP-2 activate Akt on Ser473 and Thr308 very differently in a time and dose-dependent manner. Using inhibitors specific to each Akt phosphorylation site, we showed that both Ser473 and Thr308 must be phosphorylated for BMP-9 and/or IGF-2-induced osteoblast differentiation, whereas BMP-2 requires phosphorylation of only Ser473. Furthermore, cells stimulated with BMP-2 in the presence of FBS require the phosphorylation of Akt at Ser473 and the dephosphorylation of Akt at Thr308 to increase the osteoblast differentiation with alkaline phosphatase activity similar to that of BMP-9 plus FBS. These results provide a better understanding into how BMP-9 induces osteoblast differentiation and its synergy with IGF-2 at the signaling level. This knowledge is essential for preparing the serum-free osteogenic media required for bone tissue engineering or developing growth factor delivery systems to improve bone formation.

Interactions between bone cells and biomaterials: An update.

As the populations of the Western world become older, they will suffer more and more from bone defects related to osteoporosis (non-union fractures, vertebral damages), cancers (malignant osteolysis) and infections (osteomyelitis). Autografts are usually used to fill these defects, but they have several drawbacks such as morbidity at the donor site and the amount and quality of bone that can be harvested. Recent scientific milestones made in biomaterials development were shown to be promising to overcome these limitations. Cell interactions with biomaterials can be improved by adding at their surface functional groups such as adhesive peptides and/or growth factors. The development of such biomimetic materials able to control bone cell responses can only proceed if it is based on a sound understanding of bone cell behavior and regulation. This review focuses on bone physiology and the regulation of bone cell differentiation and function, and how the latest advances in biomimetic materials can be translated within promising clinical outcomes.

Modulation of MAPK signalling by immobilized adhesive peptides: Effect on stem cell response to BMP-9-derived peptides.

Biomimetic materials were developed to regulate stem cell behaviour. We have analyzed the influence of polycaprolactone (PCL) films, functionalized with adhesive peptides derived from fibronectin (pFibro) or bone sialoprotein (pBSP), on the response of murine multipotent C3H10T1/2 cells to bone morphogenetic protein-9 (BMP-9) and its derived peptides (pBMP-9 and SpBMP-9). PCL-pFibro promoted better cell cytoskeleton organization and faster focal adhesion kinase activation than did PCL-pBSP. PCL-pFibro also promoted MAPK signalling to improve the cell response to BMP-9 by inactivating ERK1/2 and stimulating p38 and JNK. BMP-9, pBMP-9 and SpBMP-9 induced greater phosphorylation of Smad1/5/8 in cells attached to PCL-pFibro than in cells on PCL-pBSP. These phosphorylated Smad1/5/8 were translocated to the nucleus. BMP-9 and its derived peptides restored the phosphorylation of JNK in cells on PCL-pBSP, but it remained less phosphorylated than in cells on PCL-pFibro stimulated with pBMP-9 and SpBMP-9. Cells attached to PCL-pFibro contained more Runx2, essential for stem cell commitment to become osteoblasts, than did cells on PCL-pBSP when incubated with BMP-9 and its derived peptides. Runx2 was no longer detected when the cells were pre-treated with JNK inhibitor. Therefore pFibro plus BMP-9 and its derived peptides may be a promising strategy to develop biomimetic materials. STATEMENT OF SIGNIFICANCE: Biomaterials functionalized with adhesive peptides to favour bone repair have generated a great interest over the past decade. However, the effect of these materials on the ability of cells to respond to growth factors remains poorly known. One major growth factor subfamily involved in bone formation is the bone morphogenetic protein (BMP). However, these BMPs are expensive. We therefore developed less costly derived molecules. We showed how adhesive peptides derived from bone matrix proteins grafted onto polymer films affect the intracellular signalling and thus the ability of stem cells to be activated by BMP and its derived molecules. We have therefore identified a combination of bioactive polymers and BMP molecules that direct the stem cells towards bone forming cells.

Identification of a growth factor mimicking the synergistic effect of fetal bovine serum on BMP-9 cell response.

The bone morphogenetic proteins (BMPs) are potent osteogenic molecules that are used for bone repair in delivery systems and in regenerative medicine. We studied the responses of murine MC3T3-E1 preosteoblasts to doses of recombinant human (rh)BMP-9 with and without fetal bovine serum (FBS). rhBMP-2 was used as a control since it is currently approved by the Food and Drug Administration for bone application. We analyzed the major cell signaling pathways and the expression of osteogenic markers. Without FBS, BMP-9 had a similar effect on MC3T3-E1 preosteoblast differentiation in comparison to BMP-2. In contrast, FBS reduced the EC50 of BMP-9 fourfold to sixfold, as determined by osterix gene expression and alkaline phosphatase (ALP) activity, while it had no influence on EC50 of BMP-2. As suggested by MAPK inhibitor assays, FBS could induce an intracellular signaling environment that favors cell response to BMP-9 by inhibiting ERK1/2 activation and increasing p38 phosphorylation. Finally, IGF-2 (100 ng/mL) could mimic the effect of FBS on BMP-9 cell response in terms of MAPK signaling and ALP activity. Thus, the action of BMP-9 on preosteoblast differentiation can be greatly improved by IGF-2. This finding may well be critical for developing optimal growth factor delivery systems and bone tissue engineering strategies.

Biocompatibility testing of single-walled carbon nanotubes on murine preosteoblasts: higher osteoblastic differentiation with BMP-9 than with BMP-2.

Carbon nanotubes (CNTs) have been used in orthopaedic applications because of their exceptional mechanical properties. However, the influence of CNTs on the behaviour of bone-forming cells and on the ability of these cells to respond to growth factors, such as bone morphogenetic proteins (BMPs), remains poorly known. Therefore, in the present study, single-walled CNTs (SWCNTs) were synthesised using an induction thermal plasma process and purified using a multistep procedure. The impact of these purified SWCNTs on the Smad activation, cell proliferation and differentiation, with or without BMP-2 and BMP-9 (1.92 nM), was also studied using western blot, mitochondrial enzymatic activity, TUNEL, RT-PCR and alkaline phosphatase activity analyses. Pre-treatment of MC3T3-E1 preosteoblasts with SWCNTs accelerated the Smad1/5/8 activation, induced by both BMP-2 and BMP-9, within 15 min. It also slightly affected their proliferation at 48 h without apoptosis. Interestingly, at 72 h, BMP-9 favoured the differentiation of MC3T3-E1 preosteoblasts pretreated with SWCNTs to a larger extent than BMP-2 did. Therefore, the combination of BMP-9 with SWCNTs appears to be a promising avenue for bone applications.

Biomimetic materials for controlling bone cell responses.

Bone defects that cannot "heal spontaneously during life" will become an ever greater health problem as populations age. Harvesting autografts has several drawbacks, such as pain and morbidity at both donor and acceptor sites, the limited quantity of material available, and frequently its inappropriate shape. Researchers have therefore developed alternative strategies that involve biomaterials to fill bone defects. These biomaterials must be biocompatible and interact with the surrounding bone tissue to allow their colonization by bone cells and blood vessels. The latest generation biomaterials are not inert; they control cell responses like adhesion, proliferation and differentiation. These biomaterials are called biomimetic materials. This review focuses on the development of third generation materials. We first briefly describe the bone tissue with its cells and matrix, and then how bone cells interact with the extracellular matrix. The next section covers the materials currently used to repair bone defects. Finally, we describe the strategies employed to modify the surface of materials, such as coating with hydroxyapatite and grafting biomolecules.

Effect of BMP-2 and/or BMP-9 on preosteoblasts attached to polycaprolactone functionalized by adhesive peptides derived from bone sialoprotein.

Biomaterials functionalized by adhesive peptides improve the cell-substratum interaction. However, their influence on the response of cells to growth factors is still poorly understood. We have shown that bone morphogenetic protein (BMP) 2 activates the Smad pathway only in murine MC3T3-E1 preosteoblasts attached to polycaprolactone (PCL) film functionalized by RGD peptides derived from bone sialoprotein (pRGD). We have now analysed the way recombinant human BMP-2 and/or BMP-9 (0.38 nM) influence the signal transduction and differentiation of MC3T3-E1 preosteoblasts attached to PCL-pRGD. While kinetics of MAPK activation were similar in cells treated by BMP-2 and BMP-9, different kinetics of Smad activation and ß-catenin stabilization were observed. BMP-2 induced Smad1/5/8 phosphorylation within 0.5 and BMP-9 within 4 h, while the ß-catenin was lower at 2 h only in cells treated with BMP-9. However, both BMPs induced the translocation of phosphorylated Smad1/5/8 to the nucleus at 4 h and increased Dlx5, osterix and osteocalcin transcripts as well as alkaline phosphatase activity at 72 h. A BMP-2/BMP-9 combination that maintained the ß-catenin amount constant but reduced that of phosphorylated Smad within 4 h had quite similar effect than BMP-2 alone. It is therefore important to determine how biomimetic materials influence the response of cells to BMPs.

Preventing MEK1 activation influences the responses of human osteosarcoma cells to bone morphogenetic proteins 2 and 9.

It was recently suggested that bone morphogenetic protein (BMP)-2 may be useful for treating osteosarcoma cells. BMP-9, which has been patented to treat breast and prostate cancers, has a higher osteoinductive potential than BMP-2. Peptides derived from the knuckle epitope of BMPs (pBMPs) also induced osteogenic differentiation. However, the effect of BMP-9 and pBMPs on osteosarcoma cells is unclear. We analyzed the effects of BMP-2, BMP-9, pBMP-2, and pBMP-9 on the behavior of human MG-63 and SaOS-2 osteosarcoma cells. An inhibitor of MEK1 activation (PD98059) that prevents downstream extracellular signal-regulated kinase 1/2 (ERK1/2) phosphorylation and a specific inhibitor of p38 were also used as mitogen activated protein kinase-targeting therapy is being investigated as a treatment modality for osteosarcoma. BMP-2 and BMP-9 (1.92 nmol/l) induced the phosphorylation of Smad1/5/8 in both osteosarcoma cells within 1 h but had different effects on mitogen activated protein kinase pathways. Whereas BMP-2 mainly activated ERK1/2, BMP-9 phosphorylated p38 within 1 h. pBMP-2 did not activate either the Smad or ERK/p38, whereas pBMP-9, like BMP-9, induced both Smad1/5/8 and p38 phosphorylation. p38 activation by BMP-9 or pBMP-9 was also enhanced by PD98059. However, BMP-2 or BMP-9 increased the amounts of distal-less homeobox 5 and Osterix mRNAs in SaOS-2 cells within 6 h, whereas pBMP-9 had no effect. PD98059 promoted the highest level of Osterix mRNA in SaOS-2 cells incubated with BMP-2 or BMP-9, whereas p38 inhibitor had no effect. Furthermore, PD98059 induced the lowest proliferation of MG-63 cells incubated with BMP-2, whereas p38 inhibitor did not affect the proliferation of either osteosarcoma cell line. Therefore a combination of BMP-2 or BMP-9 and an inhibitor of MEK1 may be a promising tool for regulating osteosarcoma cell behavior.

The evaluation of ectopic bone formation induced by delivery systems for bone morphogenetic protein-9 or its derived peptide.

We have earlier shown that a peptide derived from the bone morphogenetic protein-9 (pBMP-9) stimulates mouse preosteoblasts MC3T3-E1 differentiation in vitro. Here, we evaluated the effects of two delivery systems (DSs) for pBMP-9, one based on collagen and the other on chitosan. The release kinetics of BMP-9 (used as control) and pBMP-9 from these DSs were first determined in vitro by using enzyme-linked immunosorbent assay and high performance liquid chromatography assays, respectively. Micro-computerized tomography and histological analysis were then performed to study in vivo the ectopic ossification induced by both DSs containing these molecules in C57BL/6 mouse quadriceps. We found that collagen DS released in vitro about 35% of its BMP-9 within 1 h, whereas chitosan DS released 80%. The pBMP-9 was released from both DSs more slowly for up to 10 days. These release kinetics seemed to fit the Korsmeyer-Peppas model. Only chitosan DS containing BMP-9 induced strong bone formation in all mice quadriceps within 24 days. All mice quadriceps treated by pBMP-9 trapped in this DS also favored bone structures that started to mineralize. However, pBMP-9 in collagen DS failed to promote ectopic ossification within 24 days in vivo. This study highlights the importance to optimize carrier, thus improving the efficiency of pBMP-9 in vivo.

Effect of functionalized polycaprolactone on the behaviour of murine preosteoblasts.

The efficiency of biomaterials used in bone repair depends greatly on their ability to interact with bone cells. Hence, we have functionalized polycaprolactone (PCL) films by peptides derived from the bone sialoprotein containing RGD sequence (pRGD), to increase their ability to interact with murine MC3T3-E1 preosteoblasts, and favour cell response to recombinant human bone morphogenetic protein-2 (rhBMP-2). RGE peptides (pRGE) were used as negative controls. The PCL films were hydrolyzed with NaOH and then carboxylic acid groups were activated to allow chemisorption of the peptides. Alkaline treatment increased the hydrophilicity of PCL films without significantly change their roughness. Peptide immobilization on PCL was checked by X-ray photoelectron spectroscopy. Hydrolyzed PCL films (Hydro PCL), which adsorbed fibronectin and vitronectin from serum after 1 h incubation, prevented the spreading of MC3T3-E1 preosteoblasts, while films bearing pRGD or pRGE did not. In contrast, MC3T3-E1 preosteoblasts attached to pRGD and incubated for 1 h in serum-free medium spread better than cells on Hydro PCL or pRGE. Only cells on pRGD had organized cytoskeleton, phosphorylated focal adhesion kinase on Y(397) and responded to rhBMP-2 by activating Smad pathway. Thus, pRGD PCL may be used to favour bone cell cytoskeletal organization and response to rhBMP-2.

Bone cells-biomaterials interactions.

With the aging population, the incidence of bone defects due to fractures, tumors and infection will increase. Therefore, bone replacement will become an ever bigger and more costly problem. The current standard for bone replacement is autograft, because these transplants are osteoconductive and osteoinductive. However, harvesting an autograft requires additional surgery at the donor site that is related to high level of morbidity. In addition, the quantity of bone tissue that can be harvested is limited. These limitations have necessitated the pursuit of alternatives using biomaterials. The control of bone tissue cell adhesion to biomaterials is an important requirement for the successful incorporation of implants or the colonization of scaffolds for tissue repair. Controlling cells-biomaterials interactions appears of prime importance to influence subsequent biological processes such as cell proliferation and differentiation. Therefore, interactions of cells with biomaterials have been widely studied especially on two-dimensional systems. This review focuses on these interactions.